Assembly of Small Pickup Trucks Powerful Double Cabin Pickup Petrol
4*4 Drive in KD Kits
Six main advantages of assembling the Small Pickup Trucks Powerful 4*4 Drive Petrol Double Cabin Pickup in local:
--- Save Customs Duty and other tax;
--- Save Shipping Cost;
--- Increase margin;
--- Improve competitiveness;
--- Develop your local industry;
--- Creat job opportunities.
1. Description of the Small Pickup Trucks Powerful 4*4 Drive Petrol
Double Cabin Pickup:
| Double Cabin Pickup Truck - Model 1030 |
| Version | 1030 Gasoline 4WD Deluxe |
| Basic Parameter |
| Engine | 2.4L 136 Horse Power |
| Transmission | 5 Speed Manual |
| Overall Dimensions (mm) | 5219*1870*1864 |
| Maximum Speed | 140 |
| Actual Fuel Consumption | 12.0 |
| Theoretical Fuel Consumption | 10.4 |
| Ground Clearance(mm) | 217 |
| Car body |
| Wheel Base(mm) | 3100 |
| Front Wheel Base (mm) | 1580 |
| Rear Wheel Base (mm) | 1580 |
| Curb Mass (kg) | 1830 |
| Vechicle Type | Pickup Truck |
| Door | 4 |
| Seat | 5 |
| Fuel Tank Capacity(L) | 72 |
| Engine |
| Engine Type | 4G69S4N |
| Displacement(ml) | 2378 |
| Air Intake Type | Natural Aspirated |
| Cylinder Spread Pattern | L |
| Number of Cylinder | 4 |
| Air Valve in Each Cylinder | 4 |
| Compression Ratio | 9.8:1 |
| Valve Mechanism | DOHC |
| Maximum Horsepower(Ps) | 136 |
| Maximum Power(Kw) | 100 |
| Maximum Power Speed(rpm) | 5250 |
| Maximum Torque(N.m) | 200 |
| Maximum Torque Speed(rpm) | 3000 |
| Fuel Type | Gasoline |
| Fuel Supply Type | Multi-Point Injection |
| Cylinder Head Material | Aluminum |
| Cylinder Body Material | Iron |
| Emission | Euro V |
| Transmission |
| Speed | 5 |
| Type | Manual Transmission(MT) |
| Chassis |
| Driving Method | 4WD |
| Front Suspension | Double Wishbone Independent Suspension |
| Rear Suspension | Leafspring |
| Steering | Hydraulic Power Steering |
| Body Structure | non-integrated type |
| Wheel Brake |
| Front Brake Type | Ventilated Disc |
| Rear Brake Type | Drum |
| Parking Brake Type | Hand |
| Front Tyre Size | 245/70R17 |
| Rear Tyre Size | 245/70R17 |
| Spare Tyre | Full Size |
| Active/Passive Safety |
| Dual Airbags | Driver side● / Co-driver side● |
| Seatbelt Unfastening Warning System | ● |
| Central Locking | ● |
| Remote Key | ● |
| Control Equipment |
| ABS | ● |
| EBD | ● |
| External Equipment |
| Alum-Alloy Wheel | ● |
| Internal Equipment |
| Steering Wheel | Leather |
| Steering Wheel Adjusting Type | Up and Down |
| Steering Wheel w/Audio and Bluetooth | ● |
| Visual Imaging System | ● |
| ECU Monitor | ● |
| Seat Equipment |
| Seat Material | Leather |
| The Central Armrest | Front● / Rear- |
| Multimedia Equipment |
| GPS System | ● |
| Colourful Screen | ● |
| Bluetooth/Car telephone | ● |
| Sound Source Connector | USB+AUX |
| Speaker | 8 |
| Lighting Equipment |
| Dipped Headlight | Halogen |
| Full Beam Headlight | Halogen |
| Front Lamp | ● |
| Electric Height-adjustable Headlamps | ● |
| Window/Rear View Mirror |
| Front/Rear Window | Electric |
| Electrical Control Rear View Mirror | ● |
| Air Condition |
| Electric Control Air Conditioning | Manual/Automatic |
| Remarks: 1. "●"Available "—"Not Available; 2. Length of Vehicle is
5330mm when equipped with Rear Bumper; 3. All the above mentioned
quotations are valid for 30 days from the issuing date here. |
2. Our service and our capability:
In this project, our Chinese company will provide technology support to your company, by sending engineers and technicians to your
local place to training your staff, and passing on our China's knowledge your staff (including but
not limited to the vehicle manufacturing skills, management system
of the vehicle assembly factory, etc. ...); in the same time,
supply the complete vehicle SKD/CKD parts for being re-assembled in your local place as well as the assembly equipments; and factory design, equipment layout design in the factory, ... ...
3. Our Cooperation Mode:
A. Trade Agency
At first stage, we can do exporting & importing trade business,
gradually build the mutual trust and favorable business
relationship, and then develop to project cooperation. If our
partner hasn’t gathered enough capital to do the project, this
cooperation way is recommended to accumulate funds and experience
for the project start later.
B. Turnkey Project/ Technology Transfer Mode
In this project, our oversea partners take 100% shareholdings, and
our Group assists you with technology and all necessary equipment
of the factory, all in "turn-key project" mode. You pay for the
technology transfer, while we help you to establish the assembly
factory and provide you automobile parts in SKD or CKD status for
assembling in order to cut your cost and simplify the production
process. We provide you with all the necessary technology
assistance and auto parts till you can master all required
technologies and be capable to assemble vehicles on your own
completely.
C. Joint Venture Mode
1st way: we take 15% of the shareholding and being responsible for offering
the Business Plan Assistance, Production Line Layout & Plant
Design, Equipment Installation & Debugging, Technology Support,
Worker Training, Manufacturing, Production & Quality Control
Management, Advice & Guidance for Sales & After-Sales, Development
Plan & Solution, etc.
2nd way: we take 35% of the shareholding and being responsible for offering
the Key Equipments, Business Plan Assistance, Production Line
Layout & Plant Design, Equipment Installation & Debugging,
Technology Support, Worker Training, Manufacturing, Production &
Quality Control Management, Advice & Guidance for Sales &
After-Sales, Development Plan & Solution, etc.
3rd way: we take more than 35% of the shareholding and being responsible
for offering the Capital, some Credit based on reliable guarantee,
Key Equipments, Business Plan Assistance Production Line Layout &
Plant Design, Equipment Installation & Debugging, Technology
Support, Worker Training, Manufacturing, Production & Quality
Control Management, Advice & Guidance for Sales & After-Sales,
Development Plan & Solution, etc.
4. Requirements on our Cooperation Partners:
If you start with trade business, a necessary amount of funds for
vehicle cycle purchase, a decent showroom for auto exhibition and a
kind of repair shop, enough. However, if you want to start the auto
assembly plant project, you have to reach the following subjective
and objective requirements:
• Workshop / Factory: 5000-8000 square meters to start, and a piece of an industrial
land around 20000-25000 square meters for expansion in future.
• Fund: You need to have necessary economic strength & investment
capacity, specifically, two million USD at least, excluding land
and workshop.
• Market channel: You’d better have your own car sales channel & network, automobile
related business.
• Auto import tariff policy: The import tariff policy in your country is very important, the
difference of import tariff between CKD (completely knocked down)
and CBU (complete built unit) shall be at least 30-35%; for
example, if the import tariff on CBU is 35%, so it must be 5% or
free on CKD. It is the key factor to set up an assembly plant in
local overseas, however, if the import tariff on CKD is almost the
same with that on CBU, the auto plant will have not any profit
space and it makes no sense to start it.
• Good relationship with government: it can give you good and preferential policies or incentives on
this automobile assembly project, and even it can bring you big
orders for the assembly plant.
5. Process of our Auto KD Assembly Project:
6. Finally, this Auto KD Assembly Project is Profitable:
If you are interested, contact us now, we will never make you
disappointed ! Seize this opportnity, you win, we win, win-win !!
Looking forward to your cooperation!!
Our Contact:
Lucky Peng (Ms.)
China Big S & T Dev (Group) Co., Limited
Website: www.auto-assemblyplants.com; www.chainautoassembly.com; www.china-big.com.cn
Email: project11@chainautoassembly.com; project1@chainautoassembly.com; yingqingpeng@china-big.com.cn;
Skype: chongqingbig
Tel No. (WeChat / Whatsapp / Viber): 15223551381
